Skip to content

+49(0) 6184 / 9239 – 0info@kmp-online.de

Wishlist
Language:
- Deutsch
- English

Topbar

KMP – Krick Messtechnik & Partner GmbH & Co. KG

Home
Products
Industries
About us
Info-Center

Home
Products
Industries
About us
Info-Center

Products

You are here:

Home
Products

Showing 1–16 of 42 results

Straight thermocouple
Armatur mit auswechselbarem Meßeinsatz

Straight thermocouple
Armatur mit auswechselbarem Meßeinsatz

Große Eintauch-Thermoelemente Typ AM / AMK
Form AM (AMK) nach DIN EN 50446

Große Eintauch-Thermoelemente Typ AM / AMK
Form AM (AMK) nach DIN EN 50446

Immersion thermocouple with metal protecive tube
Fitting with replaceable thermocouple inset

Immersion thermocouple with metal protecive tube
Fitting with replaceable thermocouple inset

Large straight thermocouples
Form AK (AKK) acc. to DIN EN 50446

Large straight thermocouples
Form AK (AKK) acc. to DIN EN 50446

Screw-in thermocouple
Fitting with replaceable thermocouple-inset

Screw-in thermocouple
Fitting with replaceable thermocouple-inset

Einschweiß-Thermoelement
Fitting with replaceable thermocouple inset

Einschweiß-Thermoelement
Fitting with replaceable thermocouple inset

Flanged thermocouple
Fitting with replaceable thermocouple inset

Flanged thermocouple
Fitting with replaceable thermocouple inset

Sheathed thermocouple with thermal plug
Flexible version with mounted thermal plug

Sheathed thermocouple with thermal plug
Flexible version with mounted thermal plug

Sheathed thermocouple with Lemosa plug
Flexible version with fixed Lemosa plug

Sheathed thermocouple with Lemosa plug
Flexible version with fixed Lemosa plug

Angle type thermocouple
Armatur mit auswechselbarem Thermoelement-Meßeinsatz

Angle type thermocouple
Armatur mit auswechselbarem Thermoelement-Meßeinsatz

Cable thermocouple with plug
Insulated wire thermocouples in flexible version with miniature thermal plug

Cable thermocouple with plug
Insulated wire thermocouples in flexible version with miniature thermal plug

Bayonet Thermocouple
Design with bayonet cap, adjusting spring and connection cable

Bayonet Thermocouple
Design with bayonet cap, adjusting spring and connection cable

Magnet surface thermocouple with cable
Ausführung mit Oberflächen-Anpressfeder und angeschlossener Ausgleichsleitung

Magnet surface thermocouple with cable
Ausführung mit Oberflächen-Anpressfeder und angeschlossener Ausgleichsleitung

Surface – Sheathed Thermocouple with connection cable
Version with surface-receivers and connected sheathed and compensation cable

Surface – Sheathed Thermocouple with connection cable
Version with surface-receivers and connected sheathed and compensation cable

Pipe mounted thermocouple with connection cable
(Deutsch) Ausführung mit Oberflächen-Aufnahmeklotz und angeschlossener Ausgleichsleitung

Pipe mounted thermocouple with connection cable
(Deutsch) Ausführung mit Oberflächen-Aufnahmeklotz und angeschlossener Ausgleichsleitung

Thermocouple inset
Flexible and/or rigid version with connection socket

Thermocouple inset
Flexible and/or rigid version with connection socket

1 2 3

Menu

Home
Contact
AGB
Privacy Policy
Legal notice

Address

KMP – Krick Messtechnik & Partner GmbH & Co. KG
Am Bahnhof 6a
D-63505 Langenselbold

Phone: +49(0) 6184 / 9239 – 0
Fax: +49(0) 6184 / 9239 – 22
E-mail: info@kmp-online.de

© 2020 KMP - Krick Messtechnik & Partner GmbH & Co. KG  | All rights reserved

Eintauch-Widerstandsthermometer (englisch)

Eintauch-Widerstandsthermometer

Armatur mit auswechselbarem Widerstandsthermometer-Meßeinsatz

Berechnung der Meßeinsatzlänge = Nennlänge +25mm

Schutzrohrdurchmesser D

9 x 1.0mm 11 x 1.0mm 11 x 2.0mm 12 x 1,5mm 15 x 3.0mm

andere

Prozeßanschluß

Anschlagflansch (nach DIN 43734, aus GG) Gegenflansch (nach DIN43734, aus Stahl) G1/2" Klemmverschraubung "GEV" aus 1.4571 (V4A) G1" Klemmverschraubung "GEV" aus Stahl

andere

Nennlänge NL

180mm 250mm 355mm 500mm

andere

Temperaturbelastung

Meßstelle: von (°C)

Meßstelle: bis (°C)

Umgebung/Anschlußkopf (°C)

Toleranzklasse

Klasse "B" Klasse "A"

andere

Schutzrohrwerkstoff

Stahl St. 35.8 1.4571 (V4A) Edelstahl teflonisiert hochwarmfest 1.4762 hochwarmfest 1.4841

andere

Innenschutzrohr

Keramik Typ "610" Keramik Typ "799"

andere

Anschlußkopf

Form A: Leichtmetall Form B: Leichtmetall

andere

Mantelwiderstandsthermometer-Messeinsatz

Pt-100 einfach Pt-100 doppelt Pt-1000 einfach Pt-1000 doppelt 2-Leiterschaltung 3-Leiterschaltung 4-Leiterschaltung

andere

Einsatzbedingungen

Temperatur

Medium

Druck

Zusatz / Bemerkungen

Firma / Absender *

Anrede *

Ansprechpartner *

Straße / Ort *

Telefon *

Fax

E-Mail *

Ihre Ref.-Nr.

Stückzahl

Alternative mgl.

Lieferzeit

Datenschutz *

Ich bestätigte, die Informationen zur Datenerfassung durch Nutzung dieses Formulars zur Kenntnis genommen zu haben. Die von KMP durch dieses Formular erfassten Daten dienen ausschließlich zur Bearbeitung meiner Anfrage. Ich kann die Löschung meiner Daten jederzeit von KMP verlangen.

Datenschutzerklärung

Große Eintauch-Thermoelemente Typ AM / AMK (englisch)

Große Eintauch-Thermoelemente Typ AM / AMK

Form AM (AMK) nach DIN EN 50446

Berechnung der Drahtlänge = Nennlänge +40mm unedel (+80mm edel)

Schutzrohrdurchmesser D

22mm 26mm

andere

Nennlänge NL

500mm 710mm 1000mm 1400mm

andere

Prozessanschluss

Anschlagflansch (nach DIN 43734, aus GG)

Gegenflansch (nach DIN 43734, aus Stahl)

G1" Klemmverschraubung "GEV" aus Stahl

andere

Thermoelement-Meßeinsatz

NiCr-Ni "K" einfach NiCr-Ni "K" doppelt Fe-CuNi "J" einfach Fe-CuNi "J" doppelt NiCrSi-NiSi "N" einfach NiCrSi-NiSi "N" doppelt PtRh-Pt "S" einfach PtRh-Pt "S" doppelt PtRh-Pt "R" einfach PtRh-Pt "R" doppelt PtRh-Pt "B" einfach PtRh-Pt "B" doppelt

andere

Temperaturbelastung

Meßstelle: von (°C)

Meßstelle: bis (°C)

Umgebung/Anschlußkopf (°C)

Schutzrohrwerkstoff

Stahl St. 35.8 1.4571 (V4A) Edelstahl teflonisiert hochwarmfest 1.4762 hochwarmfest 1.4841

andere

Innenschutzrohr

Keramik Typ "610" Keramik Typ "799"

andere

Anschlusskopf

Form A Leichtmetall Form B Leichtmetall

andere

Toleranzklasse

Klasse "2" Klasse "1"

andere

Zusatz / Bemerkungen

Firma / Absender *

Anrede *

Ansprechpartner *

Straße / Ort *

Telefon *

Fax

E-Mail *

Ihre Ref.-Nr.

Stückzahl

Alternative mgl.

Lieferzeit

Datenschutz *

Ich bestätigte, die Informationen zur Datenerfassung durch Nutzung dieses Formulars zur Kenntnis genommen zu haben. Die von KMP durch dieses Formular erfassten Daten dienen ausschließlich zur Bearbeitung meiner Anfrage. Ich kann die Löschung meiner Daten jederzeit von KMP verlangen.

Datenschutzerklärung

Eintauch-Thermoelement (englisch)

Eintauch-Thermoelement

Armatur mit auswechselbarem Meßeinsatz

Berechnung der Meßeinsatzlänge = Nennlänge +25mm

Schutzrohrdurchmesser D

9 x 1.0mm 11 x 1.0mm 11 x 2.0mm 12 x 1,5mm 15 x 3.0mm

andere

Schutzrohrwerkstoff

Stahl St. 35.8 1.4571 (V4A) Edelstahl teflonisiert hochwarmfest 1.4762 hochwarmfest 1.4841

andere

Prozessanschluss

Anschlagflansch (nach DIN 43734, aus GG) Gegenflansch (nach DIN43734, aus Stahl) G1/2" Klemmverschr. "GEV" aus 1.4571 (V4A) G1" Klemmverschraubung "GEV" aus Stahl

andere

Toleranzklasse

Klasse "2" Klasse "1"

andere

Temperaturbelastung

Meßstelle: von (°C)

Meßstelle: bis (°C)

Umgebung/Anschlußkopf (°C)

Nennlänge NL

180mm 250mm 355mm 500mm

andere

Innenschutzrohr

Keramik Typ "610" Keramik Typ "799"

andere

Anschlusskopf

Form A Leichtmetall Form B Leichtmetall

andere

Thermoelement-Meßeinsatz

NiCr-Ni "K" einfach NiCr-Ni "K" doppelt Fe-CuNi "J" einfach Fe-CuNi "J" doppelt NiCrSi-NiSi "N" einfach NiCrSi-NiSi "N" doppelt PtRh-Pt "S" einfach PtRh-Pt "S" doppelt PtRh-Pt "R" einfach PtRh-Pt "R" doppelt PtRh-Pt "B" einfach PtRh-Pt "B" doppelt Fe-CuNi "L" einfach Fe-CuNi "L" doppelt

andere

Einsatzbedingungen

Temperatur

Medium

Druck

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Große gerade Thermoelemente AK (AKK) (englisch)

Large immersion thermocouple Type AM / AMK

Calculation of the wire length = Nominal length + 40mm base metal (+ 80mm precious)

Calculation of the wire length = Nominal length + 40mm base metal (+ 80mm precious)

Protective tube dia D

22mm 26mm

others

Nominal length NL

500mm 710mm 1000mm 1400mm

others

Process connection:

Stop flange (acc. to DIN 43734, made of GG)

Counter flange (acc. to DIN 43734, made of steel

G1" clamp connection "GEV" of steel

others

Thermocouple inset

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual PtRh-Pt "S" single PtRh-Pt "S" dual PtRh-Pt "R" single PtRh-Pt "R" dual PtRh-Pt "B" single PtRh-Pt "B" dual

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection head (°C)

Protective tube material

Steel St. 35.8 1.4571 (V4A) Stainless steel teflonised highly heat resistant 1.4762 highly heat resistant 1.4841

others

Internal protective tube

Ceramic Type "610" Ceramic Type "799"

others

Connection head

Form A: Light metal Form B: Light metal

others

Tolerance class

class "2" class "1"

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Eintauch-Thermoelement mit Metall-Schutzrohr Typ BM / BMK (englisch)

Immersion thermocouple with metal protecive tube

Fitting with replaceable thermocouple inset

Calculation of the inset length = Nominal length + 25mm

Protective tube dia D

9 x 1.0mm 11 x 1.0mm 11 x 2.0mm 12 x 1.5mm 15 x 3.0mm

others

Nominal length NL

180mm 250mm 355mm 500mm

others

Prozessanschluss

Stop flange (acc. to DIN 43734, made of GG)

Counter flange (acc. to DIN 43734, made of steel G1/2" clamp connection "GEV" of 1.4571 (V4A)

G1" clamp connection "GEV" of steel

others

Thermocouple inset

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual PtRh-Pt "S" single PtRh-Pt "S" dual PtRh-Pt "R" single PtRh-Pt "R" dual PtRh-Pt "B" single PtRh-Pt "B" dual Fe-CuNi "L" single Fe-CuNi "L" dual

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection head (°C)

Protective tube material

Steel St. 35.8 1.4571 (V4A) Stainless steel teflonised highly heat resistant 1.4762 highly heat resistant 1.4841

others

Internal protective tube

Ceramic Type "610" Ceramic Type "799"

others

Connection head

Form A: Light metal Form B: Light metal

others

Tolerance class

class "2" class "1"

others

Operating conditions

Temperature

Medium

Pressure

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Große gerade Thermoelemente AK (AKK) (englisch)

Large straight thermocouples

Form AK (AKK) acc. to DIN EN 50446

Calculation of the inset length = Nominal length + 40mm base metal (+ 80mm precious)

Protective tube dia D

24 x 2,5mm (only for KER 610) 24 x 3.0mm (only for KER 799) 26 x 3.0mm (only for KER 530)

others

Internal protective tube

yes

Process connection

Stop flange (acc. to DIN 43734, made of GG)

Counter flange (acc. to DIN 43734, made of steel

G1" clamp connection "GEV" of steel

others

Connection head

Form A: Light metal Form B: Light metal

others

Thermocouple inset

NiCr-Ni "K" single NiCr-Ni "K" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual PtRh-Pt "S" single PtRh-Pt "S" dual PtRh-Pt "B" single PtRh-Pt "B" dual PtRh-Pt "R" single PtRh-Pt "R" dual

others

Protective tube material

Ceramic Type "610" Ceramic Type "799" Ceramic Type "530"

andere

Nominal length NL

500mm 710mm 1000mm 1400mm

others

Neck tube HL

Diameter 32 x 200mm

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection head (°C)

Tolerance class

class "2" class "1"

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Einschraub-Thermoelement (englisch)

Screw-in thermocouple

Fitting with replaceable thermocouple-inset

Protective tube Dia

6 x 1.0mm 9 x 1.0mm 11 x 1.0mm 11 x 2.0mm 14 x 2.5mm

others

Protective tube length NL

160mm 250mm 400mm

others

Screw neck material

1.4541 (V2A) 1.4571 (V4A)

others

Connection head

Form A: Light metal

Form B: Light metal

others: Light metal

Thermocouple inset

1 x NiCr-Ni "K" 2 x NiCr-Ni "K" 1 x Fe-CuNi "J" 2 x Fe-CuNi "J" 1 x NiCrSi-NiSi "N" 2 x NiCrSi-NiSi "N" 1 x Fe-CuNi "L" 2 x Fe-CuNi "L"

others

Operating conditions

Temperatur

Medium

Pressure

Screw neck

G 1⁄2“ G 1“

others

Tube material

1.4541 (V2A) 1.4541 (V2A)

others

Extension pipe length HL

145mm

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection head (°C)

Tolerance class

class 2 class 1

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Einschweiß-Thermoelement

Einschweiß-Thermoelement

Fitting with replaceable thermocouple inset

Calculation of the inset length = Protective tube length + Extension pipe length + 10mm

Weld-in protective sleeve

L=110, D=24, drilling depth=105, cone=65 mm L=110, D=18, drilling depth=105, cone=73 mm L=140, D=24, drilling depth=135, cone=65 mm L=170, D=18, drilling depth=165, cone=133mm L=200, D=24, drilling depth=195, cone=65 mm L=200, D=24, drilling depth=195, cone=125mm L=260, D=24, drilling depth=255, cone=125 mm L=410, D=32, drilling depth=405, cone=275 mm

others

Extension pipe length HL

165mm

others

Certification of material testing acc. to DIN 50049

2.1 Plant certification 2.2 Test certificate Acceptance test certificate 3.1

others

Thermocouple inset

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual PtRh-Pt "S" single PtRh-Pt "S" dual

others

Operating conditions

Temperature

Medium

Pressure

Material of protective sleeve

1.7335 (13CrMo44) 1.7380 (10CMo910) 1.5415 (15Mo3) 1.4571 (6CrNiMoTi17122)

others

Connection head

Form A: Light metal Form B: Light metal

others

Temperature load

Measuring point: from (°C)

Measuring point: to (°C)

Environment/Connection head (°C)

Tolerance class

class "2" class "1"

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Flansch-Thermolelement (englisch)

Flanged thermocouple

Fitting with replaceable thermocouple inset

Calculation of the inset length = Protective tube length + Extension pipe length + 10mm

Protective tube diameter D

11 x 2.0mm 14 x 2.5mm

others

Flange

DN25/PN40 Form C DN40/PN16 Form C

others

Nominal length NL

160mm 250mm 400mm

others

Alternatively / resistant to acids and alkalis

Hasteloy C Tantalum Titanium Nickel Teflon

others

Temperature load

Measuring point: from (°C)

Measuring point: to (°C)

Environment/Connection head (°C)

Tolerance class

class "2" class "1"

others

Protective tube material

1.4541 (V2A) 1.4571 (V4A)

others

Material of flange

1.4541 (V2A) 1.4571 (V4A)

others

Extension pipe length HL

82mm 145mm

others

Connection head

Form A: Light metal Form B: Light metal

others

Thermocouple inset

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual PtRh-Pt "S" single PtRh-Pt "S" dual Fe-CuNi "L" single Fe-CuNi "L" dual

others

Operating conditions

Temperature

Medium

Pressure

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Mantel-Thermoelemente mit Thermostecker (englisch)

Sheathed thermocouple with thermal plug

Flexible version with mounted thermal plug

Sheath diameter DMa

0.5mm 1.5mm 3.0mm 4.5mm 6.0mm

others

Nominal length NL

100mm 300mm 500mm 1000mm 2000mm

others

Plug temperature

200°C 350°C 650°C (only standard with round contacts)

others

Sheathed thermocouple

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual Fe-CuNi "L" single Fe-CuNi "L" dual PtRh-Pt "S" single PtRh-Pt "S" dual PtRh-Pt "R" single PtRh-Pt "R" dual

others

Measuring point

welded insulated ground welded

andere

Sheath material

1.4541 (V2A) 2.4816 (Inconel 600)

others

Plug connector

Size Mini with flat contacts (up to DMa=3.0mm) Standard with round contacts (from DMa=3.0mm) single (1 element) dual (2 elements)

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment / Plug (°C)

Operating conditions

Temperature

Medium

Pressure

Tolerance class

class "2" class "1"

andere

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Mantel-Thermoelemente mit Lemosa-Stecker (englisch)

Sheathed thermocouple with Lemosa plug

Flexible version with fixed Lemosa plug

Sheath diameter DMa

0.5mm 1.5mm 3.0mm 4.0mm 6.0mm

others

Nominal length NL

100mm 300mm 500mm 1000mm 2000mm

others

Pin assignment

Lemosa plug Lemosa coupling Protection rating IP68 (otherwise IP54)

others

Sheathed thermocouple

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual Fe-CuNi "L" single Fe-CuNi "L" dual PtRh-Pt "S" single PtRh-Pt "S" dual PtRh-Pt "R" single PtRh-Pt "R" dual

others

Sheath material

1.4541 (V2A) 2.4816 (Inconel 600)

others

Lemosa plug connection

Size 00 Size 0 Size 1 Size 2 2 Pins 4 Pins 6 Pins 8 Pins Contacts gold plated made of element material

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connector

Tolerance class

class "2" class "1"

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Mantel-Thermoelement mit Kabel (englisch)

Sheathed thermocouple with cable

Flexible version with connected compensating cable

Sheath diameter DMa

0.5mm 1.5mm 3.0mm 4.0mm 6.0mm

others

Connecting plug

Mini plug Standard plug Mini coupling Standard coupling Lemosa plug Lemosa coupling Size 00 Size 0 Size 1 Size 2 2polig 4polig 6polig Plus pole on socket Plus pole on pin

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection cable (°C)

Tolerance class

class "2" class "1"

others

Sheath material

1.4541 (V2A) 2.4816 (Inco)

others

Nominal length NL

100mm 300mm 500mm 1000mm 2000mm

others

Sheathed thermocouple

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual Fe-CuNi "L" single Fe-CuNi "L" dual PtRh-Pt "S" single PtRh-Pt "S" dual PtRh-Pt "R" single PtRh-Pt "R" dual

others

Measuring point

welded insulated ground welded

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Winkel-Thermoelement (englisch)

Angle type thermocouple

Armatur mit auswechselbarem Thermoelement-Meßeinsatz

Berechnung der Meßeinsatzlänge = Nennlänge +15mm

Schutzrohr

Stahl emailliert, D=22 * 500mm, max. 600°C Reineisen, D=26 * 500mm, max. 550°C Reineisen, D=26 * 500mm, max. 1200°C Silizium Carbit nitriert, D=25*500mm, max.1200°C Silizium Carbit nitriert, D=40*500mm, max.1200°C

andere

Winkel

Winkelstück + Halterohr gerade Anschlag + Halterohr gebogen ohne Anschlag, nur gebogen

andere

Anschlußkopf

Form A: Leichtmetall Form B: Leichtmetall

andere

Thermoelement-Meßeinsatz

NiCr-Ni "K" einfach NiCr-Ni "K" doppelt Fe-CuNi "J" einfach Fe-CuNi "J" doppelt NiCrSi-NiSi "N" einfach NiCrSi-NiSi "N" doppelt PtRh-Pt "S" einfach PtRh-Pt "S" doppelt PtRh-Pt "R" einfach PtRh-Pt "R" doppelt PtRh-Pt "B" einfach PtRh-Pt "B" doppelt

andere

Einsatzbedingungen

Temperatur

Medium

Druck

Halterohr

500mm 710mm 1000mm

andere

Prozeßanschluß

Anschlagflansch (nach DIN 43734, aus GG) Gegenflansch (nach DIN43734, aus Stahl) G1" Klemmverschraubung "GEV" aus Stahl

andere

Temperaturbelastung

Meßstelle: von (°C)

Meßstelle: bis (°C)

Umgebung/Anschlußleitung (°C)

Toleranzklasse

Klasse 2 Klasse 1

andere

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Kabel-Thermoelement mit Stecker (englisch)

Cable thermocouple with plug

Insulated wire thermocouples in flexible version with miniature thermal plugr

Structure and insulation material

Teflon-single strands; twisted; D=approx. 2.0mm Teflon / Teflon; D= approx. 3.0mm Teflon / Wire / Teflon; D=approx. 3,0mm Glass silk / Glass silk; D=approx. 3.0mm Glass silk / Glass silk / Wire; D=approx. 3.5mm Teflon / Silikone; D = approx. 3.5mm Silicone / Silicone; D=approx. 4.5mm

others

Plug-in connection

Size Mini with flat contacts (up to diameter DMa Standard with round contacts (from diameter DMa= Plug temperature 200 °C Plug temperature 350 °C Plug temperature 650 °C single (1 element) dual (2 elements)

Sheathed thermocouple

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual Fe-CuNi "L" single Fe-CuNi "L" dual

others

Measuring point

welded insulated junction bare ground welded

others

Nominal length NL

100mm 300mm 500mm 1000mm 2000mm

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment / Plug (°C)

Tolerance class

class "2" class "1"

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Bajonett-Thermoelement (englisch)

Bayonet Thermocouple

Design with bayonet cap, adjusting spring and connection cable

Protective tube Dia

3.0mm 6.0mm 8.0mm

others

Nominal length NL

30mm

others

Design of tip

flat smooth made of stainless steel with tip of stainless steel with silver tip of 10mm length for particularly

others

Cable material

Silicone Teflon Glass silk up to 400°C Glass silk up to 550°C

others

Thermocouple inset

1 x NiCr-Ni 2 x NiCr-Ni 1 x Fe-CuNi 2 x Fe-CuNi 1 x NiCrSi-NiSi 2 x NiCrSi-NiSi 1 x Fe-CuNi "L" 2 x Fe-CuNi "L"

others

Operating conditions

Temperature

Medium

Pressure

Tube material

1.4571 (V4A)

others

Bayonet cap

for 10mm nipple for 12mm nipple

others

Spring adjustment range

FL = 180mm FL = 200mm FL = 350mm

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection head (°C)

Tolerance class

class 2 class 1

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Magnet-Oberflächen-Thermoelement mit Kabel (englisch)

Magnet surface thermocouple with cable

Thermoelectric lead

Insulation Silicone Insulation Teflon Insulation Glas silk Shielded Yes Shielded No Cable ends tin plated Cable end sleeves

others

Plug-in connection with thermal plug

Mini plug Standard plug Plug Couplingothers

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connector (°C)

Tolerance class

class "2" class "1"

others

Cable length

KL = 170mm KL = 500mm KL = 1000mm

others

Connection with Lemosa plug

Size 0 Size 1 Plug Coupling

Sheath thermocouple

NiCr-Ni "K" single Fe-CuNi "J" single NiCrSi-NiSi "N" single Fe-CuNi "L" single

others

Operating conditions

Temperature

Medium

Pressure

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Oberflächen-Mantel-Thermoelement mit Anschlußleitung (englisch)

Surface - Sheathed Thermocouple with connection cable

Version with surface-receivers and connected sheathed and compensation cable

Measurement value reception

Cu-Block 10*5*40mm Cu-sheet 15*1*30mm

others

Thermoelectric lead

Insulation Silicone Insulation Teflon Insulation Glas silk Shielded Yes Shielded No Cable end sleeves

others

Plug connection with thermal plug

Mini plug (up to DMa = 3mm dia) Standard with round contacts (from DMa=3.0mm) Plug Coupling

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connector (°C)

Tolerance class

class "2" class "1"

others

Sheathed cable

Diameter DMa = 3.0mm

others

Nominal length NL = 500mm

other nominal length

Cable length

KL = 170mm KL = 500mm KL = 1000mm

others

Plug connection with Lemosa plug

Size 0 Size 1 Plug Coupling

Sheathed thermocouple

NiCr-Ni "K" single Fe-CuNi "J" single NiCrSi-NiSi "N" single Fe-CuNi "L" single

others

Operating conditions

Temperature

Medium

Pressure

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Rohranlege-Thermoelement mit Anschlussleitung (englisch)

Pipe mounted thermocouple with connection cable

Measurement value reception

Measurement value reception

VA-Block 6*6*30m Cu-Block 6*6*30mm Ms-Block 6*6*30mm

others

Radius R12 Radius R20 Rohr 1/4" Rohr 1/2"

others

Cable length

KL = 500mm KL = 1000mm KL = 2500mm

others

Mantel-Thermoelement

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual Fe-CuNi "L" single Fe-CuNi "L" dual

others

Operating conditions

Temperature

Medium

Pressure

Thermoelectric lead

Insulation Silicone Insulation Teflon Insulation Glas silk Shielded Yes Shielded No Cable end sleeves Cable ends tin plated

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection cable (°C)

Tolerance class

class "2" class "1"

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Thermoelement-Meßeinsatz (englisch)

Thermocouple inset

Calculation of the inset length = Protective tube length + Extension pipe length + 10mm

Design

rigid (pipe) flexible (sheathed cable)

Pipe diameter D

3.0mm 4,0mm 6.0mm

others

Meßeinsatzlänge MEL

275mm 315mm 375mm 405mm 435mm 555mm

others

Thermocouplet

NiCr-Ni "K" single NiCr-Ni "K" dual Fe-CuNi "J" single Fe-CuNi "J" dual NiCrSi-NiSi "N" single NiCrSi-NiSi "N" dual Fe-CuNi "L" single Fe-CuNi "L" dual PtRh-Pt "S" single PtRh-Pt "S" dual PtRh-Pt "R" single PtRh-Pt "R" dual

others

Measuring point

welded insulated ground welded

Material

1.4301 (V2A) 1.4541 (V2A) for flexible version 2.4816 (Inconel 600)

others

Sheath diameter DMa (flexible version)

0.5mm 1.5mm 3.0mm 4.0mm 6.0mm

others

Temperature load

Measuring point: from (°C)

Measuring point: to (°C)

Environment/plug-in socket: (°C)

Tolerance class

class "2" class "1"

others

Operating conditions

Temperature

Medium

Pressure

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Multipoint Thermoelement (englisch)

Multipoint thermocouple

Mineral insulated version - flexible

Max. number of measuring point: with supply and return conductors / with central lead

Sheath diameter DMa

1.0mm, max. 3/5 measuring points 1.5mm, max. 3/5 measuring points 2.0mm, max. 5/10 measuring points 3.0mm, max. 5/10 measuring points 4.0mm, max. 5/10 measuring points 5.0mm, max. 10/20 measuring points 6.0mm, max. 10/20 measuring points 7.0mm, max. 10/20 measuring points 8.0mm, max. 10/20 measuring points 9.0mm, max. 10/20 measuring points 10.0mm, max. 10/20 measuring points 12.5mm, max. 10/20 measuring points

others

Sheath material

1.4541 (V2A) 1.4571 (V4A)2.4816 (Inco) 2.4816 (Inconel 600)

others

Max. number of measuring points

max. 20 measuring points with central lead max. 10 measuring points with supply and return

others

Strand length KL

250mm

others

Thermocouple

NiCr-Ni "K" NiCrSi-NiSi "N"

andere

Possible max. nominal length NL

35m to max. D=7mm 22m to max. D=9mm 18m to max. D=10mm 11m to max. D=11mm

andere

Nominal length NL

Anzahl der Messstellen

L1

L2

L3

L4

L5

L6

L7

L8

L9

L10

L11

L12

L13

L14

L15

L16

L17

L18

L19

L20

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection cable (°C)

Certificates:

Material certificate 3.1 Test calibration certificate

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Rohranlege-Widerstandsthermometer mit Anschlusskabel (englisch)

Pipe mounted resistance thermometer with connection cable

Version with surface receiver box and connected extension cable

Measurement value reception

VA-Block 6*6*30mm Cu-Block 6*6*30mm Ms-Block 6*6*30mm

others

Radius R12 Radius R20 Pipe 1/4" Pipe 1/2"

others

Cable length

KL = 500mm KL = 1000mm KL = 2500mm

others

Sensor element

Pt-100 single Pt-100 dual Pt-1000 single Pt-1000 dual Ni-100 single Ni-100 dual Ni-1000 single Ni-1000 dual

others

Connection cable

Insulation Silicone Insulation Teflon Insulation Glas silk Shielded Yes Shielded No Cable end sleeves Cable ends tin plated

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection cable (°C)

Tolerance class:

class "A" class "B"

others

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Eintauch-Widerstandsthermometer (englisch)

Immersion resistance thermometer

Fittings with replaceable resistance thermometer inset

Calculation of the inset length = Nominal length + 25mm

Protective tube dia D

9 x 1.0mm 11 x 1.0mm 11 x 2.0mm 12 x 1,5mm 15 x 3.0mm

others

Process connection

Stop flange (acc. to DIN 43734, made of GG) Counter flange (acc. to DIN 43734, made of steel G 1/2" clamp connection “GEV” of 1.4571 (V4A) G 1" clamp connection “GEV” of 1.4571 (V4A)

others

Nominal length NL

180mm 250mm 355mm 500mm

others

Temperature load

Measurement point: from (°C)

Measurement point: to (°C)

Environment/Connection head (°C)

Tolerance class

class "B" class "A"

others

Protective tube material

Steel St. 35.8 1.4571 (V4A) Stainless steel teflonised highly heat resistant 1.4762 highly heat resistant 1.4841

others

Internal protective tube

Ceramic Type "610" Ceramic Type "799"

andere

Connection head

Form A: Light metal Form B: Light metal

others

Sheath resistance thermometer inset

Pt-100 single Pt-100 dual Pt-1000 single Pt-1000 dual 2-wire circuit 3-wire circuit 4-wire circuit

others

Operating conditions

Temperature

Medium

Pressure

Comments

Company *

Title *

Name *

Address *

Phone *

Fax

E-mail *

References

Quantity

Delivery time

Alternatives

Privacy policy *

I confirmed that I have taken note of the information on data collection by using this form. The data collected by KMP through this form will be used exclusively to process my request. I can request the deletion of my data from KMP at any time.

Privacy policy

Einschraub-Widerstandsthermometer (englisch)

Screw-in Resistance thermometer

Fitting with replaceable resistance thermometer inset

Calculation of the inset length = Protective tube length + Extension pipe length + 10mm

Protective tube dia D

6 x 1.0mm 9 x 1.0mm 11 x 1.0mm 11 x 2.0mm 14 x 2,5mm

others

Screw neck

G 1/2" G 1

others

Protective tube length NL

100mm 160mm 200mm

others

Connection head

Form A: Light metal Form B: Light metal

others

Sheath resistance thermometer inset

Pt-100 single Pt-100 dual Pt-1000 single Pt-1000 dual 2-wire circuit 3-wire circuit